+66.(0)2.149 2642 – 3
Hotline
Dry Film Mold Release Agent - FG-509X Series
The FG-509X Series is a nanotechnology-driven innovation in mold release agents. It creates an ultra-thin dry film that leaves no oily or sticky residue. Effectively eliminating sticking issues for plastic, rubber, and resin parts. Providing a superior glossy mirror finish. And reducing pre-painting cleaning processes by up to 50%.
INDUSTRIAL MOLD RELEASE
Why Leading Factories Choose FG-509X Mold Coating
"Thin Film" Innovation for Precision
Dry Film release agent provides smooth mold release without oily residue. Eliminates sticking issues for plastic, rubber, and resin parts.
Precision Dimension:
Nano-thin film allows molding of high-precision parts and enhances surface finishing details.
Secondary Process:
Molded Parts are oil-free and ready for immediate secondary processes such as painting or bonding. No residue on transparent parts.
Easy Mold Release:
Non-sticky coating enables easy release. Suitable for materials such as silicone rubber and PU.
Long lasting film:
Up to 2000 shots (Depending on material and complexity of design). Easy cleaning of the mold.
Recommended Applications
Optical lenses, high-precision automotive parts, Medical Devices, and Engineering Plastics molding
Select the Right Product for You
FG-509X Series: Available based on operational temperature levels
| Properties | FG-5093 Series | FG-5095 Series |
|---|---|---|
| Main Component | Fluororesin | Fluororesin |
| Solvent | Fluorine solvent | Fluorine solvent |
| Flash Point | None | None |
| Film Thickness | 10-20 nm | 10-20 nm |
| Film Hardness | 4H~ | 4H~ |
| Water Contact Angle | 112° | 112° |
| Max. Operating Temperature | ~200°C | ~250°C |
How to Apply FG-509X Series Dry Film Mold Release Agent
Simple 4-Step Application
1. Clean the Mold
Clean the mold surface thoroughly, ensuring it is free from oil, dust, and contaminants for maximum coating efficiency
2. Apply the Coating
Once the mold is clean and dry, apply the coating to the surface (multiple coats recommended for the first-time application)
3. Air Dry (Approx. 2 Hours)
After application, allow the mold to air dry at room temperature for approximately 2 hours to let the coating set
4. Ready for Production
Once completely dry, the mold is ready for immediate production. Parts will release effortlessly
FAQ
How does FG-509X (Dry Film) mold release differ from standard silicone sprays?
Standard silicone sprays leave oily residues, which can interfere with subsequent painting or screen printing. However, FG-509X uses Fluorine Dry Film technology, which dries completely upon application. It ensures easy part release and is 100% oil-free.
What is the difference between FG-5093 and FG-5095, and which should I choose?
The main difference lies in their "Max Operating Temperature" capabilities. If your mold operates below 200°C, the FG-5093 is sufficient. For high-temperature molds, we recommend FG-5095, which withstands up to 250°C.
